BUILDFAST + Wet Mix Adhesive

Build fast plus is a wet mix, self curing bricks and blocks laying adhesive for any kind of masonry work. It is Eco Friendly Ready To Use as well as easy to use condition and does not need dilution with water or additives. The product is designed to save water, labour and time needed for conventional mortar. Build fast plus is applied with very less efforts. The application of the wet mix adhesive product can be done by any mason, who does wall construction, using same tools as in practice as well as with notched trowel, squzee etc.

ADVANTAGES

  1. Eco Friendly
  2. Labour Saving
  3. Energy Saving
  4. Time Saving
  5. Water Saving
  6. No Wastage of materials

UNIQUE FEATURES

  1. Better bonding strength
  2. Limited time for fast air curing
  3. No post curing with water needed
  4. Substitutes the cement sand mortar.

MIXING

  • Material is READY TO USE
  • Do not add or mix any additives or water

PACKAGING & STORAGE CONDITIONS

  • Std. PAcking in 25 kgs Bags / Buckets.
  • Pack the leftover material in the closed Bags / Buckets.
  • Store in cool & dry places. Store Safely for next use

POT LIFE & SHELF LIFE

  • In open pot 6 to 8hours in shade (not under direct sunlight)
  • 120 days from the date of manufacturing in standard storage warehouse.

HEALTH & SAFETY

Avoid prolonged contact with Eyes and Skin. For Detailed Information Refer to Relevant Material Safety Data Sheet.

SETTING & CURING

The products set initially by Dry-curing in approximately 3 to 4 hours and the next activity can be taken up after 72 hours of application

PREPARATION

  • Clean the Block surface with a brush to remove dust & loose particles.
  • Sort properly the blocks/bricks for undulated surface which affects the coverage of material

METHOD OF APPLICATION & CLEANING TOOL

  • OPen the Bucket and shake the material well.
  • Remove the required quantity of material in a container and mix well with spatula
  • Apply in 1 to 3 mm. on the blocks with the help of special notch trowel.
  • Lay the wall & go ahead for next work
  • Clean toos & equipmnet with water after use.

RECOMMENDED APPLICATOIN AREAS

  • As Adhesive for bonding masonry units such as
  • Porotherm block
  • Fly ash brick
  • Red clay bricks etc.
  • Aerated concrete blocks
  • Light weight blocks
  • Cements blocks